Navara D40 2" Body Lift KIt Preparation

Hello Guys!! After weeks of sleepless nights, planning and R n D... I bring to you..."DIY Body Lift KIt " as a guide or reference for paranoid and Enthusiast who believe " When you want it done good, Do IT Yourself

!".  Please fell free to comment ( Constructively ) or ask questions if in doubt.

You can get your local engineering shop or any workshop with a lathe machine to fabricate this or contact me to fabricate this kit for you. 

General this what you need

  

Nissan Navara D40 Dual Cab , 2012 6 Spd Manual 

What you NEED For the lift

 1)  2" Lift spacers

a-   75 mm  ( Dai ) x 50mm (Ht) Aluminium Spacers    8 pcs 

b-   50 mm  ( Dai ) x 50mm (Ht) Aluminium Spacers    4 pcs

c-   50mm x 50mm x 75mm (L) Mild steel Square Hollow      4 pcs

I personally prefer Aluminium due to its durability ,high impact strength and weight . 

You may choose to use Teflon, Steel  or other types of material to own discretion, but bear in mind high impact strength is the priority of the material.  

2)   Bolts

a-   M10 1.25 x 100mm and washer (Class 8.8 or 10.6)        4pcs

b-   M12 1.25 x 100mm and washer (Class 8.8 or 10.6)        8pcs

   

I have attached a Sketch so you can get a clear picture of size and dimension of the spacer you need to fabricate for the lift . All of it is quite straight forward Except one piece that requires a little extra machining , Which is the Passenger side tub mount that has a small aligning tube protruding out 15 mm , Machine the spacer accordingly to recieve the tube to sit inside.


All the Best !!! Take your Time ... Rushing Wont Help anything!!!... Cheers

Comming NexT .... Installation!!!!